Test Fixture for the XMC style Modules
NEW
- Test fixture for testing XMC modules outside of the XMC Carrier
- Follows the VITA 42 specification
- Allows testing of the XMC conduction cool as well as convection cool modules
- x8 OCuLink connection to the carrier or an External PC (utilizing VadaTech XMC125 and/or PCI125/PCI128 module for a PC interface)
- PCIe x8 Gen4 interface to the XMC
- Breakout of the XMC I/O connector for testability of the XMC rear I/O
- Intelligent Fan controller keeps the XMC at a temp configured by the user
- +12V input only
Download Datasheet Add to Info Request
add to compare
The VT125 is a test asset that allows testing any XMC module external to the Carrier. This allows testing the XMC in environmental chamber as well as shock/vib fixture.
The XMC module interfaces to the VT125 via PCIe x8 Lanes Gen4 (module will negotiate with the host which allows the PCIe to go down to PCIe x1 lane). The user defined XMC I/O is routed to the rear of the VT125 to allow a breakout of the user defined I/O on a separate I/O module.
The VT125 allows XMC module in conduction cool as well as non-conduction form factor. The onboard intelligent Fan controller allows the XMC module to operate at a temperature set by the user.
Key Features
- Test fixture for testing XMC modules outside of the XMC Carrier
- Follows the VITA 42 specification
- Allows testing of the XMC conduction cool as well as convection cool modules
- x8 OCuLink connection to the carrier or an External PC (utilizing VadaTech XMC125 and/or PCI125/PCI128 module for a PC interface)
- PCIe x8 Gen4 interface to the XMC
- Breakout of the XMC I/O connector for testability of the XMC rear I/O
- Intelligent Fan controller keeps the XMC at a temp configured by the user
- +12V input only
Benefits
- VadaTech provides full integration
- Compact size allows placing the VT125 in chamber testing as well as Vib/Shock fixture
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
ATC128
ATCA Rugged Blade Processor with Dual Xeon Cascade Lake-SP
- Dual socket 24-core Intel® Xeon® Platinum Processors - Scalable Performance (SP)
- Multiple SKU support (i.e. 8256, 8253, 6238T, 6230T, 5220T, 5218T, 4209T, etc.)
- Twelve banks of DDR4 for up to 384 GB with ECC per socket (total of 768 GB)
- PCIe Fabric and expansion channels
- Dual 10/100/1000Base-T Base Channels
- Dual 10GbE Copper via front panel
- Dual USB 3.0
- IPMI Management Controller with Serial Over LAN capabilities (SOL)
- BIOS redundancy boot with multiple Watch Dog Timers (WDTs) for fail-over, before and after BIOS boot
View product
ATC128 Data Sheet
ATC342
ATCA “Mongoose 1” Video Mixer
- Video Mixer (Windowing)
- External Input: 4 Analog and 1 DVI-I
- Composite TV (CVBS), S-Video, RGB, YPbPr
- Resolutions up to 1920x1200@60Hz
- RS-170, RS-343, NTSC, PAL, SECAM, STANAG
- 21.5MHz to 166MHz Pixel Clock Range
- Composite Sync, Separate Sync, or Sync on Green/Y
- Four video scalers for Window Zoom/Shrink/Crop/Pan/Position
- External Output: Analog daisy-chain and 1 DVI-I (Analog and 24-bit Digital)
- Z-Ordering, Alpha Blending, Chroma Keying on all 5 inputs
- High-quality 30-bit Digital Video Processing Paths
- Screen/Window Capture to file
- Additional Graphics Layer w/ per-pixel Alpha Blending
- Four GbE ports (2 to the base channels, 2 to the front panel)
- RS-232 to the front panel
- IPMI Management Controller
View product
ATC342 Data Sheet
VT835
3U ATCA Hybrid Chassis with 8 AMCs AMCs (Mid-size)
- 19” rack mount 3U ATCA Hybrid AMC Chassis
- 1x ATCA slot, 8 mid-size AMC slots and 2x ATCA RTM slots
- 40G or 10G fabric across the backplane
- x8 PCIe Gen3, x4 Gen3 SRIO, or Layer 2/3 managed 10GbE/40GbE dual XAUI
- Redundant push/pull cooling configuration
- Integrated dual shelf managers, switch and AMC carrier
- Full redundancy for all FRUs
- Redundant AC or DC Power Modules
- ESD Jack
View product
VT835 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
