Altera Stratix® V GT FPGA, 100G

  • Altera Stratix® V GT FPGA in FFG-1517 package
  • Dual zQSFP+ Ports to the front panel
  • Front panel Port 0 at 100G, Port 1 at up to 40G
  • AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
  • Onboard Freescale QorIQ PPC2040 with DDR3
  • FPGA can load via Flash or via the P2040
  • FPGA Flash can be programmed via the JTAG or the P2040

Download Datasheet Add to Info Request

add to compare
0

The AMC534 is an FPGA with dual zQSFP+ connectors offering 100G performance (Port 0 at 100G, Port 1 up to 40G) via the front panel. The module is compliant to AMC.1, AMC.2, and/or AMC.4 specifications.

The onboard, re-configurable FPGA interfaces directly to the AMC FCLKA and TCLK A-D. It also has four DDR3 memory channels (32-bit wide each) with 1 GB per channel, giving 4 GB total memory. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The unit also has a quad-core P2040 that can run at 1.2 GHz with 2 GB of DDR3, 128 MB of Boot Flash, and a 32 GB SD Card. The Power Processor Control (PPC) has a x4 PCIe interface to the FPGA in addition to its local bus. The PPC has dual GbE routed to Ports 0 and 1 of the AMC.

See Intel FPGA Solutions for the advantages of using VadaTech products during application development.

 

 

VIDEO: Intel FPGA solutions at VadaTech: This video introduces the advantages of using VadaTech to build your new products embedding Intel FPGA SoC.

Key Features
  • Altera Stratix® V GT FPGA in FFG-1517 package
  • Dual zQSFP+ Ports to the front panel
  • Front panel Port 0 at 100G, Port 1 at up to 40G
  • AMC Ports 4-7 and 8-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, XLAUI, etc. are FPGA programmable)
  • Onboard Freescale QorIQ PPC2040 with DDR3
  • FPGA can load via Flash or via the P2040
  • FPGA Flash can be programmed via the JTAG or the P2040
Benefits
  • 100G performance through one port and up to 40G performance in the 2nd port via the front panel
  • Distributed processing with local P2040 processor provides more reliability, performance and eliminates a potential single-point-of-failure in the system
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

UTC020

DC Power Module, 936W

  • Single module, full-size per AMC.0
  • Dual -36V DC to -75V DC input, 936W (available in 468W)
  • Hot swappable with support for power module redundancy
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
View product UTC020 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.