Xilinx Kintex® UltraScale+™ FPGA NVIDIA Jetson AGX Xavier SOFI Carrier, AMC

  • Xilinx Kintex UltraScale+™ XCKU11P FPGA
  • NVIDIA Jetson AGX Xavier
  • SOFI site
  • 8 GB of dual 2x 32-bit wide DDR4 Memory to FPGA
  • Double module, Full-size

Download Datasheet Add to Info Request

add to compare

The AMC565 has an integrated NVIDIA Jetson AGX Xavier, a Xilinx Kintex UltraScale+™ XCKU11P FPGA with an SOFI (Serial Optimized FPGA Interface) slot. The AMC is compliant to AMC.1, AMC.2 and AMC.4 PICMG open standard specifications.

The unit has an onboard, re-configurable Xilinx Kintex UltraScale+™ XCKU11P FPGA with 2,928 DSP Slices and 653K logic cells. It interfaces directly to the backplane clock lanes FCLKA and TCLKA-D, to the backplane dual x4 SERDES or single x8 SERDES lanes per ordering option F (AMC.1 and AMC.4), as well as 32 lanes of SERDES to the SOFI. The FPGA has an interface to 8 GB of DDR4 memory (dual 2x 32-bit wide). This allows for a large buffer size to be stored during processing as well as for queuing the data to the host. The FPGA is linked to the Jetson via PCIe x8 lanes at Gen3 speed.

The Jetson AGX Xavier has a 32 TeraOPS (TOPS) of peak compute, 512-Core NVIDIA Volta GPU with 64 Tensor cores, 8-core NVIDIA Carmel Arm V.8.2 64-bit CPU and 32GB of LPDDR4. It has a link to an SDHC Socket for 64GB of additional memory (per ordering option D) as well as to an M.2 NVMe for mass storage (per ordering option B).

The backplane dual GbE link (AMC.2) can be routed either to the FPGA or to the NVIDIA GbE via onboard MUX.  

Key Features
  • Xilinx Kintex UltraScale+™ XCKU11P FPGA
  • NVIDIA Jetson AGX Xavier
  • SOFI site
  • 8 GB of dual 2x 32-bit wide DDR4 Memory to FPGA
  • Double module, Full-size
  • SOFI with integrated NVIDIA Jetson and FPGA
  • Highly integrated
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company

Block diagram

Related Products


Kintex UltraScale FPGA Carrier for FMC, AMC

  • Single module, mid-size AMC (full-size optional)
  • AMC FPGA carrier for FMC per VITA 57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
View product AMC592 Data Sheet


70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet


8U uTCA.4 Chassis Platform, (3+1) 4400W

  • μTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
  • Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane (40GbE ready)
  • Redundant FRU information devices and carrier locators
  • Four 1.1 kW AC Power supply for 4.4 kW total
  • Telco aarm
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front and back
View product VT813 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.