MRT566A

MTCA.4 RTM for AMC566

  • MicroTCA.4 RTM for the AMC566
  • DESY D1.4 Specification
  • 4x TI ADS42JB69
  • Total of 8 ADC 16-bit @ 250MSPS
  • Clock input for synchronization

Download Datasheet Add to Info Request

add to compare

The MRT566A is a Rear Transition Module (RTM) for VadaTech’s AMC566 with 4x TI ADC part number ADS42JB69 and follows DESY 1.4 Specification Zone3 pinout definition.

The 8 ADC are 16-bit with 250 MSPS. The ADC input are via SSMC connectors. The module has clock input to allow synchronization to an external source.

VadaTech offers a wide range of MicroTCA.4 products, including full systems.  Contact your local salesperson or representative for details.

Key Features
  • MicroTCA.4 RTM for the AMC566
  • DESY D1.4 Specification
  • 4x TI ADS42JB69
  • Total of 8 ADC 16-bit @ 250MSPS
  • Clock input for synchronization
Benefits
  • Expertise in RTM and MTCA.4 board design
  • Full ecosystem of MicroTCA.4 AMCs, PMs, MCH, RTMs, chassis, and application-ready systems
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC523

Dual DAC 16-bit @ 250 MSPS, Kintex-7, MTCA.4

  • Dual DAC 16-bit @ 250 MSPS utilizing MAX5878 device (user programmable for lower sampling rate)
  • Xilinx Kintex-7 FPGA XC7K410T in FFG900 package
  • Supported by DAQ Series™ data acquisition software
  • 2 GB of DDR3 memory
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • x8 PCIe (or dual x4)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Quad SFP+ (up to 6.6 Gbps)
  • JTAG selectable front and backplane
View product AMC523 Data Sheet

UTC018

AC Power Module, 1000W

  • Double-module, 12HP size module per AMC.0
  • Universal AC input (85 to 265V), 1000W
  • Provides power up to 12 AMCs, 2 MCHs and Cooling Units
  • Very low ripple voltage on +12V
  • Hot swappable with two banks of 256K flash for redundancy
  • Dual IPMI bus
  • 32–bit RISC processor
View product UTC018 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.