Log in

You are accessing a protected product information and must login.

If you are a VadaTech customer and have not yet registered, please contact sales@vadatech.com to provide you VadaTech customer account information.

I accept VadaTech copyright information.

Register

(Reload image)

Submit

Change Password

Submit

Forgot Password

Please enter your email registered at VadaTech and we will send you your password.

Submit

Back to login

You are here: HomeProductsDigital and Serial I/O

Digital and Serial I/O

VadaTech’s wide range of ATCA Rear Transition Modules (RTMs) and MicroTCA I/O AMCs make it easier to integrate these standards-based building block systems into your network or application.

In the AMC form factor, we have solutions for MicroDIN, PCIe, USB, Infiniband, 10G/40G/100G Ethernet serial ports, FireWire and more. Our ATCA RTMs offer additional storage and IO interfaces to bring expandability to your system via rear IO. Our range covers blades that follow the common pinout definition on Zone 3, such as Sun Microsystems Netra CP3260, CP3220 and the VadaTech ATC114, as well as RTMs designed and tested with specific VadaTech blades or specific blades from other vendors, such as the Artesyn (formerly Emerson) ATCA-7360 and ATCA-7365.

We have also developed several custom media converters to simplify your connectivity options.

Please contact us if you have any requirements that you don’t see below, our agile R&D team has many years’ experience in modifying standard products and developing custom solutions.

AMC Serial Communications

( close )

AMC323

Eight Port RS-422/485 Serial Adapter AMC

Eight RS-422/485 serial ports using a high density connector
x1 PCIe lane to Port 4 or Port 8, AMC.1 compliant
Single module, compact-size (mid-size and full-size options available)
Optional adapter cable to convert the high density connector to standard DB-9 connector, one per port
IPMI 2.0 compliant
RoHS compliant

View product AMC323 Data Sheet

AMC313

4 Port USB 3.0 Adapter AMC

4 USB ports (SS/HS/FS/LS)
USB type C Connectors
xHCI-compliant Host Controller for High-Speed and SuperSpeed operation (USB 3.0)

View product AMC313 Data Sheet

AMC324

Sixteen Port RS-422/485 Serial Adapter AMC

Sixteen RS-422/485 serial ports using a high density connector
x1 PCIe lane on Port 4 or Port 8, AMC.1 compliant
Single module, compact-size (mid-size and full-size options available)
Optional adapter cable to convert the high density connector to standard DB-9 connector, one per port
IPMI 2.0 compliant
RoHS compliant

View product AMC324 Data Sheet

AMC339

Multi-Channel Multi-Protocol Avionics MIL-STD-1553/ARINC429/ARINC717

Comprehensive multi-protocol support
Support for MIL-STD-1553A/B, MIL-STD-1760
Support for ARINC 429, ARINC 575, ARINC 717, ARINC 825
IRIG-B and IRIG-106 chapter 10 MIL-STD-1553 MT
Full line rate on all channels simultaneously
Up to 8 programmable RS-232/422/485 Channels
Up to 10 Avionics/Digital discrete I/O
48-bit/100ns Time Stamp

View product AMC339 Data Sheet

AMC312

5 Port USB 1.1 to Fiber Media Converter

5 Channel USB 1.1 Copper to Fiber Converter
I/O connectivity for Copper is via DP style connector
I/O connectivity for Fiber is via MTP/MPO style cable
AMC.0 specification
IPMI 2.0 compliant
RoHS compliant

View product AMC312 Data Sheet

AMC303

AMC Eight Port RS-232 Serial Adapter

AMC.1 compliant
x1 PCIe lane to Port 4 or Port 8
Single module, compact-size (mid-size and full-size options available)
Eight RS-232 serial ports using a high density connector
Optional adapter cable to convert the high density connector to standard DB-9 connector, one per port (see ordering options)
IPMI 2.0 compliant
RoHS compliant

View product AMC303 Data Sheet

AMC304

AMC Sixteen Port RS-232 Serial Adapter

AMC.1 compliant
x1 PCIe lane on Port 4 or Port 8
Single module, compact-size (mid-size and full-size options available)
Sixteen RS-232 serial ports using a high density connector
Optional adapter cable to convert the high density connector to standard DB-9 connector, one per port (see ordering options)
IPMI 2.0 compliant
RoHS compliant

View product AMC304 Data Sheet

AMC310

AMC 5 Port USB Adapter

Single module, full size USB adapter module to AMC.1
Five USB 2.0 ports
One EHCI-compliant Host Controller for High-Speed (Rev. 2.0) operation
Two OHCI-compliant Host Controllers for classical (Low or Full) Speed operation
USB 2.0 certified (Test ID = 80000026)
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC310 Data Sheet

AMC325

AMC Dual Port Multi-SCC Adapter

Single module, full size AdvancedMC
AMC.1 compliant
PCIe x4 lanes
HDLC, ASYNC, BISYNC, and Transparent mode capabilities
Multiprotocol transceiver modes:
- RS-232 (V.28)
- X.21 (V.11)
- RS-449/V.36
- EIA-530/530A (V.10 and V.11)
- V.35 (V.35 & V.28)
Dual Micro-DB25 connectors
256 Mbytes of SDRAM
Up to 128 Mbytes of Flash memory and 8 Mbyte boot Flash
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC325 Data Sheet

AMC311

AMC Dual Port FireWire Adapter

Single module, mid size (full size optional) FireWire Adapter
AMC.1 compliant
Two IEEE-1394a ports (front panel accessible)
400Mbits/s throughput
Key features of FireWire include:
- High data transfer rates
- Large number and range of devices
- Plug-and-play connectivity
- On-bus power
- Asynchronous and isochronous data transfer
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC311 Data Sheet

AMC322

LEGACY

AMC 8 Port RS-422/485 Serial Adapter

Single module, compact size (mid and full size optional) serial adapter
AMC.1 compliant
PCIe x4 lanes
Eight RS-422/485 serial ports via high-density connector
Optional adapter cable to convert the high-density connector to standard DB-9 connectors
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC322 Data Sheet

AMC321

LEGACY

AMC 16 Port RS-422/485 Serial Adapter

AMC.1 compliant
Single module, compact size (mid or full size)
PCIe x4 lanes
Sixteen RS-422/485 serial ports via high-density connector
Optional adapter cable to convert the high-density connector to standard DB-9 connectors
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC321 Data Sheet

AMC320

LEGACY

AMC 8 Port RS-422/485 Serial Adapter

Single module, compact size (mid and full size optional) serial adapter
AMC.1 compliant
PCIe x4 lanes
Eight RS-422/485 serial ports via high-density connector
Optional adapter cable to convert the high-density connector to standard DB-9 connectors
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC320 Data Sheet

AMC301

LEGACY

AMC 16 Port RS-232 Serial Adapter

Single module, compact size (mid and full size optional)
AMC.1 compliant
PCIe x4 lane
Sixteen RS-232 serial ports via a high-density connector
Available with an adapter cable to convert the high-density connector to standard DB-9 connectors
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC301 Data Sheet

AMC302

LEGACY

AMC Eight Port RS-232 Serial Adapter

AMC.1 compliant
PCIe x4 lanes
Single module, compact size* (mid size and full size options available)
- *Patent-pending design allows standard front panel I/O connectivity in a half-height AMC compliant formfactor
Eight RS-232 serial ports using a high-density connector
Optional adapter cable to convert the high-density connector to standard DB-9 connectors, one per port (see ordering options)
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC302 Data Sheet

AMC300

LEGACY

AMC 8 Port RS-232 Serial Adapter

Single module, compact size (mid and full size optional) serial adapter
AMC.1 compliant
PCIe x4 lanes
Eight RS-232 serial ports using a high-density connector
Optional adapter cable to convert the high-density connector to standard DB-9 connectors, one per port (see ordering options)
IPMI 2.0 compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC300 Data Sheet

AMC Serial Communications

( expand all )

AMC323

Eight Port RS-422/485 Serial Adapter AMC

AMC313

4 Port USB 3.0 Adapter AMC

AMC324

Sixteen Port RS-422/485 Serial Adapter AMC

AMC339

Multi-Channel Multi-Protocol Avionics MIL-STD-1553/ARINC429/ARINC717

AMC312

5 Port USB 1.1 to Fiber Media Converter

AMC303

AMC Eight Port RS-232 Serial Adapter

AMC304

AMC Sixteen Port RS-232 Serial Adapter

AMC310

AMC 5 Port USB Adapter

AMC325

AMC Dual Port Multi-SCC Adapter

AMC311

AMC Dual Port FireWire Adapter

AMC322

AMC 8 Port RS-422/485 Serial Adapter

AMC321

AMC 16 Port RS-422/485 Serial Adapter

AMC320

AMC 8 Port RS-422/485 Serial Adapter

AMC301

AMC 16 Port RS-232 Serial Adapter

AMC302

AMC Eight Port RS-232 Serial Adapter

AMC300

AMC 8 Port RS-232 Serial Adapter

AMC Digital IO

( close )

AMC994

8 LVDS Expansion Module via RJ-45, 8 Tx/Rx Pairs

8 LVDS pairs
Any of the pairs could be configured as transmit or receive
Ports 12-15 or 17-20 (as LVDS)
Ports are routed to two RJ-45
Single-module mid-size (option for full-size)

View product AMC994 Data Sheet

AMC014

Dual Channel Impedance Matched Trigger Module

Dual channel impedance matched trigger module
Trigger input option:
- Via RS-232 commando
- Input thru SMPM style connector
Configuration via RS-232

View product AMC014 Data Sheet

AMC082

High Density Isolated Serial I/O Module

AMC module with 32 serial-in and 32 serial-out via front panel
RS-422/423 (ANSI TIA/EIA-422B, TIA/EIA-423-B)
Conduction cooled version available
Front panel I/O via High Density Connector (HDC)
Five LVDS Input/Output vis uDP Connector
PCIe x1 to Port 4 or Port 8
Dual GbE
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC082 Data Sheet

AMC013

Isolated I/O Expansion

Isolated RS-485
Ten Isolated Output
Ten Isolated Input
Single ST Style Fiber optical output
Seamless connection to the VadaTech FMC155 module
IPMI 2.0 compliant
RoHS compliant

View product AMC013 Data Sheet

AMC081/081C

High Density Isolated Serial I/O Module

AMC module with 16 serial in and 16 serial out via front panel
RS-422/423 (ANSI TIA/EIA-422B, TIA/EIA-423-B)
Conduction cooled version available
Front panel I/O via High Density Connector (HDC)
PCIe x1 to Port 4 or Port 8
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC081/081C Data Sheet

AMC099

AMC 24-channel Isolated (12 drive, 12 sink) Output Module

24-channel isolated output
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a compact size AMC compliant form factor
Input voltage from 10V to 38V with 45V surge @ 500 ms
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC099 Data Sheet

AMC995

LVDS Expansion Module via RJ-45

8 LVDS Transmit pairs
8 LVDS Receiver pairs
Ports 12-15 and 17-20 (LVDS)
Ports are routed to four RJ-45
Single-module mid-size (option for full-size)

View product AMC995 Data Sheet

AMC080/080C

High Density Versatile Multi I/O Module

AMC module with 120 I/O via front panel
Conduction cooled version available
15 banks of 8-bit I/O. Each bank is configurable as Input and/or output
I/O’s are configurable as +3.3V or +5V per bank
Front panel I/O via High Density Connector (HDC)
PCIe/Gbe/10GbE/SRIO interface
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC080/080C Data Sheet

AMC098

AMC 24-channel Isolated (5V, 10V) Output Module

24-channel isolated output
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a compact size AMC compliant form factor
Input voltage from 10V to 38V with 45V surge @ 500 ms
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC098 Data Sheet

AMC097

AMC 24-channel Isolated Output Module

24-channel isolated output
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a half-size AMC compliant form factor
Input voltage from 10V to 38V with 45V surge @ 500 ms
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC097 Data Sheet

AMC332

Precision Triaxial , digital Gyroscope

The AMC module provides Triaxial, digital gyroscope
Based on the Analog device ADIS16505 Miniature Microelectromechanical System (MEMS) inertial Measurement unit (IMU)
Triaxial, digital accelerometer +/-78.4 m/sec2
26.5 um/sec2 in-run bias stability
Processor based on the iMX8M quad core
PCIe and Ethernet interface to the backplane
Front panel display

View product AMC332 Data Sheet

AMC096

AMC 24-channel Isolated Input Module

24-channel isolated input
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a half-size AMC compliant form factor
Programmable de-bounce times are software controlled on a channel-by-channel basis
1 ms measurement interval
Change-Of-State (COS) selections:
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
- Level sensitive
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC096 Data Sheet

AMC095

AMC 16-channel Isolated Input Module

Eight TTL/CMOS input channels
Eight 0 to 10 volt input channels
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a compact size AMC compliant form factor
Programmable de-bounce times are software controlled on a channel-by-channel basis
Change-Of-State (COS) selections:
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
- Level sensitive
Input voltage from 10V to 38V with 45V surge @ 500 ms
AMC.1 compliant
IPMI 2.0 compliant

View product AMC095 Data Sheet

AMC094

LEGACY

AMC 24 Channel Output Module, +28V

24-channel isolated output
Single module, compact size* (mid size and full size options available)
compact AMC compliant form factor
Interrupt levels are user selectable
Input voltage from 10V to 38V with 45V surge @ 500ms
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC094 Data Sheet

AMC093

LEGACY

AMC 24 Channel Output Module

24-channel isolated output
Single module, compact size* (mid size and full size options available)
compact AMC compliant form factor
Interrupt levels are user selectable
Input voltage from 10V to 38V with 45V surge @ 500ms
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC093 Data Sheet

AMC092

LEGACY

AMC 24 Channel Isolated Output Module, +5V

24-channel isolated output
Single module, compact size* (mid size and full size options available)
compact size AMC compliant form factor
Interrupt levels are user selectable
Input voltage from 10V to 38V with 45V surge @ 500ms
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC092 Data Sheet

AMC091

LEGACY

AMC 24 Channel Isolated Input Module

24-channel isolated input
Single module, compact size* (mid size and full size options available)
Programmable debounce time is software controlled on a channel-by-channel basis
ms measurement interval
Change-of-State (COS) selections: Interrupt levels are user-selectable
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
- Level sensitive
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWork

View product AMC091 Data Sheet

AMC090

LEGACY

AMC 16 Channel Isolated Input Module

Eight TTL/CMOS input channels
Eight 0 to 10 volt input channels
Single module, compact size* (mid size and full size available)
Programmable debounce times are software controlled on a channel-by-channel basis
Change-Of-State (COS) selections Input voltage from 10V to 38V with 45Vsurge at 500ms
- AMC.1 compliant
- IPMI 2.0 compliant
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
Level sensitive
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC090 Data Sheet

CM044

LEGACY

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

Data Processing CoBo (Concentration Board) in AMC format
Double module, full-size compliant to MicroTCA.0
Virtex-5 FPGA (XC5VFX100T in FFG 1136 package)
256 MB DDR3 DDR2 SDRAM and 32 MB Flash
Dual VHDCI, two dual-coax LEMO, and one micro USB connector via the front panel
Port 0 and Port 4 for GbE
Port 1 for GET Clocks
Ports 8-11 for GET Data
Activity and MGT LEDs
Slow/Fast control of ASIC ADC
Partial reconfiguration and firmware upgrade support
Advanced diagnostic, monitoring and debugging

View product CM044 Data Sheet

CM045

LEGACY

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

Data Processing AMC in double module, mid-size (full-size optional)
Compliant to MicroTCA.4
Class D1.2 compatible
High-speed Kintex-7 FPGA
16 GB DDR3 SDRAM
Octal SFP+ via the front panel
PCIe x4 Gen 3
Two channels of GbE
Ten direct low latency connections to backplane
Four low latency connections to RTM
LVDS parallel bus to RTM
Partial reconfiguration and firmware upgrade support
Advanced diagnostic, monitoring and debugging

View product CM045 Data Sheet

AMC Digital IO

( expand all )

AMC994

8 LVDS Expansion Module via RJ-45, 8 Tx/Rx Pairs

AMC014

Dual Channel Impedance Matched Trigger Module

AMC082

High Density Isolated Serial I/O Module

AMC013

Isolated I/O Expansion

AMC081/081C

High Density Isolated Serial I/O Module

AMC099

AMC 24-channel Isolated (12 drive, 12 sink) Output Module

AMC995

LVDS Expansion Module via RJ-45

AMC080/080C

High Density Versatile Multi I/O Module

AMC098

AMC 24-channel Isolated (5V, 10V) Output Module

AMC097

AMC 24-channel Isolated Output Module

AMC332

Precision Triaxial , digital Gyroscope

AMC096

AMC 24-channel Isolated Input Module

AMC095

AMC 16-channel Isolated Input Module

AMC094

AMC 24 Channel Output Module, +28V

AMC093

AMC 24 Channel Output Module

AMC092

AMC 24 Channel Isolated Output Module, +5V

AMC091

AMC 24 Channel Isolated Input Module

AMC090

AMC 16 Channel Isolated Input Module

CM044

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

AMC Digital IO

( close )

AMC994

8 LVDS Expansion Module via RJ-45, 8 Tx/Rx Pairs

8 LVDS pairs
Any of the pairs could be configured as transmit or receive
Ports 12-15 or 17-20 (as LVDS)
Ports are routed to two RJ-45
Single-module mid-size (option for full-size)

View product AMC994 Data Sheet

AMC014

Dual Channel Impedance Matched Trigger Module

Dual channel impedance matched trigger module
Trigger input option:
- Via RS-232 commando
- Input thru SMPM style connector
Configuration via RS-232

View product AMC014 Data Sheet

AMC082

High Density Isolated Serial I/O Module

AMC module with 32 serial-in and 32 serial-out via front panel
RS-422/423 (ANSI TIA/EIA-422B, TIA/EIA-423-B)
Conduction cooled version available
Front panel I/O via High Density Connector (HDC)
Five LVDS Input/Output vis uDP Connector
PCIe x1 to Port 4 or Port 8
Dual GbE
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC082 Data Sheet

AMC013

Isolated I/O Expansion

Isolated RS-485
Ten Isolated Output
Ten Isolated Input
Single ST Style Fiber optical output
Seamless connection to the VadaTech FMC155 module
IPMI 2.0 compliant
RoHS compliant

View product AMC013 Data Sheet

AMC081/081C

High Density Isolated Serial I/O Module

AMC module with 16 serial in and 16 serial out via front panel
RS-422/423 (ANSI TIA/EIA-422B, TIA/EIA-423-B)
Conduction cooled version available
Front panel I/O via High Density Connector (HDC)
PCIe x1 to Port 4 or Port 8
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC081/081C Data Sheet

AMC099

AMC 24-channel Isolated (12 drive, 12 sink) Output Module

24-channel isolated output
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a compact size AMC compliant form factor
Input voltage from 10V to 38V with 45V surge @ 500 ms
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC099 Data Sheet

AMC995

LVDS Expansion Module via RJ-45

8 LVDS Transmit pairs
8 LVDS Receiver pairs
Ports 12-15 and 17-20 (LVDS)
Ports are routed to four RJ-45
Single-module mid-size (option for full-size)

View product AMC995 Data Sheet

AMC080/080C

High Density Versatile Multi I/O Module

AMC module with 120 I/O via front panel
Conduction cooled version available
15 banks of 8-bit I/O. Each bank is configurable as Input and/or output
I/O’s are configurable as +3.3V or +5V per bank
Front panel I/O via High Density Connector (HDC)
PCIe/Gbe/10GbE/SRIO interface
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC080/080C Data Sheet

AMC098

AMC 24-channel Isolated (5V, 10V) Output Module

24-channel isolated output
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a compact size AMC compliant form factor
Input voltage from 10V to 38V with 45V surge @ 500 ms
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC098 Data Sheet

AMC097

AMC 24-channel Isolated Output Module

24-channel isolated output
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a half-size AMC compliant form factor
Input voltage from 10V to 38V with 45V surge @ 500 ms
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC097 Data Sheet

AMC332

Precision Triaxial , digital Gyroscope

The AMC module provides Triaxial, digital gyroscope
Based on the Analog device ADIS16505 Miniature Microelectromechanical System (MEMS) inertial Measurement unit (IMU)
Triaxial, digital accelerometer +/-78.4 m/sec2
26.5 um/sec2 in-run bias stability
Processor based on the iMX8M quad core
PCIe and Ethernet interface to the backplane
Front panel display

View product AMC332 Data Sheet

AMC096

AMC 24-channel Isolated Input Module

24-channel isolated input
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a half-size AMC compliant form factor
Programmable de-bounce times are software controlled on a channel-by-channel basis
1 ms measurement interval
Change-Of-State (COS) selections:
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
- Level sensitive
Interrupt levels are user selectable
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant

View product AMC096 Data Sheet

AMC095

AMC 16-channel Isolated Input Module

Eight TTL/CMOS input channels
Eight 0 to 10 volt input channels
Single module, compact size (mid-size and full-size available)
Front panel I/O connectivity in a compact size AMC compliant form factor
Programmable de-bounce times are software controlled on a channel-by-channel basis
Change-Of-State (COS) selections:
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
- Level sensitive
Input voltage from 10V to 38V with 45V surge @ 500 ms
AMC.1 compliant
IPMI 2.0 compliant

View product AMC095 Data Sheet

AMC094

LEGACY

AMC 24 Channel Output Module, +28V

24-channel isolated output
Single module, compact size* (mid size and full size options available)
compact AMC compliant form factor
Interrupt levels are user selectable
Input voltage from 10V to 38V with 45V surge @ 500ms
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC094 Data Sheet

AMC093

LEGACY

AMC 24 Channel Output Module

24-channel isolated output
Single module, compact size* (mid size and full size options available)
compact AMC compliant form factor
Interrupt levels are user selectable
Input voltage from 10V to 38V with 45V surge @ 500ms
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC093 Data Sheet

AMC092

LEGACY

AMC 24 Channel Isolated Output Module, +5V

24-channel isolated output
Single module, compact size* (mid size and full size options available)
compact size AMC compliant form factor
Interrupt levels are user selectable
Input voltage from 10V to 38V with 45V surge @ 500ms
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC092 Data Sheet

AMC091

LEGACY

AMC 24 Channel Isolated Input Module

24-channel isolated input
Single module, compact size* (mid size and full size options available)
Programmable debounce time is software controlled on a channel-by-channel basis
ms measurement interval
Change-of-State (COS) selections: Interrupt levels are user-selectable
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
- Level sensitive
AMC.1 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWork

View product AMC091 Data Sheet

AMC090

LEGACY

AMC 16 Channel Isolated Input Module

Eight TTL/CMOS input channels
Eight 0 to 10 volt input channels
Single module, compact size* (mid size and full size available)
Programmable debounce times are software controlled on a channel-by-channel basis
Change-Of-State (COS) selections Input voltage from 10V to 38V with 45Vsurge at 500ms
- AMC.1 compliant
- IPMI 2.0 compliant
- Disabled
- Rising edge, low-to-high transition
- Falling edge, high-to-low transition
Level sensitive
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC090 Data Sheet

CM044

LEGACY

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

Data Processing CoBo (Concentration Board) in AMC format
Double module, full-size compliant to MicroTCA.0
Virtex-5 FPGA (XC5VFX100T in FFG 1136 package)
256 MB DDR3 DDR2 SDRAM and 32 MB Flash
Dual VHDCI, two dual-coax LEMO, and one micro USB connector via the front panel
Port 0 and Port 4 for GbE
Port 1 for GET Clocks
Ports 8-11 for GET Data
Activity and MGT LEDs
Slow/Fast control of ASIC ADC
Partial reconfiguration and firmware upgrade support
Advanced diagnostic, monitoring and debugging

View product CM044 Data Sheet

CM045

LEGACY

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

Data Processing AMC in double module, mid-size (full-size optional)
Compliant to MicroTCA.4
Class D1.2 compatible
High-speed Kintex-7 FPGA
16 GB DDR3 SDRAM
Octal SFP+ via the front panel
PCIe x4 Gen 3
Two channels of GbE
Ten direct low latency connections to backplane
Four low latency connections to RTM
LVDS parallel bus to RTM
Partial reconfiguration and firmware upgrade support
Advanced diagnostic, monitoring and debugging

View product CM045 Data Sheet

AMC Digital IO

( expand all )

AMC994

8 LVDS Expansion Module via RJ-45, 8 Tx/Rx Pairs

AMC014

Dual Channel Impedance Matched Trigger Module

AMC082

High Density Isolated Serial I/O Module

AMC013

Isolated I/O Expansion

AMC081/081C

High Density Isolated Serial I/O Module

AMC099

AMC 24-channel Isolated (12 drive, 12 sink) Output Module

AMC995

LVDS Expansion Module via RJ-45

AMC080/080C

High Density Versatile Multi I/O Module

AMC098

AMC 24-channel Isolated (5V, 10V) Output Module

AMC097

AMC 24-channel Isolated Output Module

AMC332

Precision Triaxial , digital Gyroscope

AMC096

AMC 24-channel Isolated Input Module

AMC095

AMC 16-channel Isolated Input Module

AMC094

AMC 24 Channel Output Module, +28V

AMC093

AMC 24 Channel Output Module

AMC092

AMC 24 Channel Isolated Output Module, +5V

AMC091

AMC 24 Channel Isolated Input Module

AMC090

AMC 16 Channel Isolated Input Module

CM044

MicroTCA.4 Virtex-5 Data Processing “CoBo” AMC

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

ATCA RTM IO

( close )

ATC998

ATCA Ethernet Pass-through Front Board

Ethernet Pass-through front board
Eight RJ-45 for front panel access
Ethernet signals routed to Zone 3 connector
Designed to mate with ART998 (RTM)
RoHS compliant

View product ATC998 Data Sheet

ART128A

ATCA Rear Transition Module (RTM) for ATC128

AdvancedTCA RTM for ATC128
Quad 10GbE
Dual 40GbE
RS-232 for management
Five Port USB
Audio
Discreate I/O
IPMI 2.0 compliant

View product ART128A Data Sheet

ART119

ATCA Rear Transition Module (RTM) for VT994

AdvancedTCA RTM
Mate specifically to the VT994 backplane
Dual DB-9 for USB
DB-15 for IPMI output
RoHS compliant

View product ART119 Data Sheet

ART139

ATCA Rear Transition Module (RTM) for ATC139

AdvancedTCA RTM for ATC139
Dual RJ-45 (GbE)
RS-232 interface for RTM Management
DSUB-26 interface to both Shelf Managers (on ATC139)
IPMI 2.0 compliant

View product ART139 Data Sheet

ART001

ATCA I/O Rear Transition Module (RTM)

ATCA RTM
5x RJ-45 ports for GbE
RJ-45 port for 10/100 Ethernet
6x SFP ports for GbE
Dual SFP+ for 10 GbE
iPASS connector for PCIe x8
RS-232 ports for management and RTM IPMI
IPMI version 2.0
RoHS compliant

View product ART001 Data Sheet

ART120

ATCA Rear Transition Module (RTM)

AdvancedTCA RTM
Layer 2 managed Ethernet switch
USB 2.0 and 3.0 Ports
Dual 10GbE and GbE
I²C Interface to Chassis CDM, Temp Sensors, etc.
VGA In/Out
RoHS compliant

View product ART120 Data Sheet

ART002

ATCA I/O Rear Transition Module (RTM)

ATCA RTM
Quad SFP for GbE
Dual SFP+ for 10 GbE
iPASS connector for PCIe x8
Five USB ports
RS-232 ports for management and RTM IPMI
IPMI version 2.0
RoHS compliant

View product ART002 Data Sheet

ART998

ATCA Rear Transition Module (RTM)

ATCA RTM for VadaTech ATC998
Eight RJ-45 for GbE
RoHS compliant

View product ART998 Data Sheet

ART980A

ATCA Rear Transition Module (RTM) for VT980

AdvancedTCA RTM for VT980
Dual DB-9 for USB
DB-15 for IPMI output

View product ART980A Data Sheet

ART500A

ATCA Rear Transition Module (RTM) for ATC500

AdvancedTCA RTM for ATC500
Quad 100GbE
Dual PCIE x8
GbE and RS-232 for management
GPS receiver and extensive clock/trigger I/O
RS-232/RS-485/RS-422 for GPS Position and Velocity
IPMI 2.0 compliant

View product ART500A Data Sheet

ART130A

ATCA Rear Transition Module (RTM) for ATC130

AdvancedTCA RTM for ATC130 Carrier
Layer two Managed switch
4 GbE as egress ports via SFP and RJ-45
RS-232 for management
Shelf Manager Interface
IPMI 2.0 compliant

View product ART130A Data Sheet

ART800

ATCA Rear Transition Module

Supports the ATC800 GbE switch
Eighteen SFP cages
18 ports of copper or fiber
Multiple I2C busses to run the shelf
RoHS compliant

View product ART800 Data Sheet

ART801

ATCA Rear Transition Module

Rear Transition Module for ATC800 switch
I2C bus expander
RoHS compliant

View product ART801 Data Sheet

ART340

Ten Fiber Video with Five Fiber USB 2.0

ATCA Rear Transition standard form factor
PICMG 3.1 compliant
Ten Fiber Video interface
- no compression is done during the conversion
Five USB 2.0 fiber
OS support for:
- OS independent

View product ART340 Data Sheet

ART131

ATCA Rear Transition Module

Zone three dual PCIe x8
- to I-Pass connectors
Managed Layer 2GbE switch
8 GbE 10/100/1000 copper ports
Quad GbE via SFP
Zone 3 dual GbE to the Switch Fabric
Zone 3 dual 10GbE with SFP+
IPMI RS-232 port
IPMI Version 2.0 compliant

View product ART131 Data Sheet

ART132

ATCA Rear Transition Module

Quad GbE via SFP
Dual InfiniBand 40Gb via QSFP+
PCIe x8 via I-Pass
Host serial
USB Fiber and Copper
IPMI Version 2.0 compliant
RoHS compliant

View product ART132 Data Sheet

ART133

Rear Transition Module (RTM) for ATC133

AdvancedTCA RTM for the ATC133
Quad SFP+ for 10 GbE
RJ-45 port for GbE
RS-232 for RTM management
- for ATCA blade management and for ATCA blade processor
IPMI version 2.0
RoHS compliant

View product ART133 Data Sheet

ART121

Rear Transition Module (RTM) for ATC121

AdvancedTCA RTM for ATC121
Layer 2 managed Ethernet switch
USB Ports
Dual 10GbE
I²C Interface to Chassis CDM, Temp Sensors, etc.
VGA
RoHS compliant

View product ART121 Data Sheet

ART110

ATCA Rear Transition Module

Single GbE L2 Switch Fabric
Dual XAUI interface to the host
L2 Light Management
- Port Trunking
- Port Mirroring
- VLAN, etc.
Routes host 10/100/1000 GbE to RJ-45
Routes host RS-232 to RJ-45
IPMI 2.0 Management Controller

View product ART110 Data Sheet

ART108

ATCA Rear Transition Module

PCIe expansion via rear panel
- Provides expansion with fiber or copper to another ATC103/104/105/106/107/108/109,AMC103 or PCI103 board
Management controller serial port
RoHS compliant

View product ART108 Data Sheet

ART105

ATCA Rear Transition Module

7-port USB hub
Dual USB fiber ports
9-port managed layer two GbE switch
Management 10/100Mbit Ethernet
Shelf monitoring port (RS-232)
Multiple I2C busses to interface to chassis
RoHS compliant

View product ART105 Data Sheet

ART104

ATCA Rear Transition Module

PCIe expansion via rear panel with fiber
- Provides expansion to another ATC103/104/105/106/107/108/109, AMC103 or PCI103 board •
One 10/100Mbit Ethernet port
Management controller serial port
RoHS compliant

View product ART104 Data Sheet

ART103

ATCA Rear Transition Module

PCIe expansion via rear panel
- Provides expansion to anotherATC103/104/105/106/107/108/109,AMC103 or PCI103 board
One 10/100Mbit Ethernet port
Management controller serial port
Two 10/100/1000 GbE Ports
High-density connector for one of the PMCuser defined I/Os
RoHS compliant

View product ART103 Data Sheet

ATCA RTM IO

( expand all )

ATC998

ATCA Ethernet Pass-through Front Board

ART128A

ATCA Rear Transition Module (RTM) for ATC128

ART119

ATCA Rear Transition Module (RTM) for VT994

ART139

ATCA Rear Transition Module (RTM) for ATC139

ART001

ATCA I/O Rear Transition Module (RTM)

ART120

ATCA Rear Transition Module (RTM)

ART002

ATCA I/O Rear Transition Module (RTM)

ART998

ATCA Rear Transition Module (RTM)

ART980A

ATCA Rear Transition Module (RTM) for VT980

ART500A

ATCA Rear Transition Module (RTM) for ATC500

ART130A

ATCA Rear Transition Module (RTM) for ATC130

ART800

ATCA Rear Transition Module

ART801

ATCA Rear Transition Module

ART340

Ten Fiber Video with Five Fiber USB 2.0

ART131

ATCA Rear Transition Module

ART132

ATCA Rear Transition Module

ART133

Rear Transition Module (RTM) for ATC133

ART121

Rear Transition Module (RTM) for ATC121

ART110

ATCA Rear Transition Module

ART108

ATCA Rear Transition Module

ART105

ATCA Rear Transition Module

ART104

ATCA Rear Transition Module

ART103

ATCA Rear Transition Module

FMC Digital and Serial I/O

( close )

FMC155

Multi I/O FMC Module, M-LVDS, RS-485/422, Single-ended +3.3V

Multiple I/O in single FMC from-factor
M-LVDS, RS-422, and singled-ended +3.3 V
16x M-LVDS input/outputs with speed up to 350 MHz and programmable crossbar circuit routing
8x RS-485/RS-422 TX with speed up to 20 Mbps
8x RS-485/RS-422 RX with speed up to 52 Mbps
16x Singled-ended +3.3 V input/outputs

View product FMC155 Data Sheet

FMC156

Multi I/O FMC Module, M-LVDS, RS-485/422, GPIO +3.3V/+5V

Multiple I/O in single FMC form-factor
M-LVDS, RS-485/RS-422, and singled-ended +3.3V/+5V
8x M-LVDS input/outputs with speed up to 350 MHz and programmable crossbar circuit routing
16x RS-485 or 8 x RS-422 with speed up to 50 Mbps
Programmable termination per Port for RS-485/RS-422
12x GPIO as +3.3V or +5V

View product FMC156 Data Sheet

FMC151

Multi I/O FMC Module, ECL or NECL Input/Output, RS-422 and Fiber Optics

12 x TX ECL or NECL RX/TX
4 x RS-422 RX/TX
Dual Fiber Optics ST style (1300-nm wave length, 2KM)
- FDDI
- ATM
- 100BAES-FX
- Custom protocol
User LED

View product FMC151 Data Sheet

FMC161

ARINC-429, ARINC-717, CAN Bus, Serial Sync and Discrete I/O

FPGA Mezzanine Card (FMC) compatible with VITA 57.1
Single-module
20x ARINC-429
2x ARINC-717
2x Serial Sync
2x Can Bus
6x Discrete
Carrier board FPGA reference design sources available

View product FMC161 Data Sheet

FMC162

NEW

MIL-STD-1553A/B

Support for MIL-STD-1553A/B, MIL-STD-1760
Quad channels

View product FMC162 Data Sheet

FMC157

Multi I/O FMC Module, Differential Input, LVDS with Isolated Output

Multiple I/O in single FMC form-factor
LVDS and Isolated I/O
7 x Differential Inputs
5 x LVDS Input or Output
2x Isolated General-Purpose Output (GPO) at +12V

View product FMC157 Data Sheet

FMC111

Single SERDES Input/Output with Clock Input

DP0 single SERDES RX+/- and TX+/- routed to the front
Direct Clock input to GBTCLK0 and GBTCLK1
SSMC connector for RX/TX pair and the clock input

View product FMC111 Data Sheet

Chassis Expansion

( close )

PCI123

PCIe Gen3 Module for PCIe Bus Expansion

PCIe Gen3 (x16) Bus Expansion module
Connects to root complex node board using up/down stream ports
Options for (1x) of x16 PCIe, (2x) of x8 PCIe or (4x) of x4 PCIe utilizing SFF-8644 connectors
Allows the use of standard copper or fiber cabling (mix of fiber/copper across the four ports is allowed)
RoHS compliant

View product PCI123 Data Sheet

PCI113

PCIE Module for PCIe Bus Expansion

PCIe x8 lanes Gen2
Upstream/Downstream orientation
Dual Fiber or copper option utilizing QSFP+connectors (mix of Fiber/Copper across the two ports is allowed)
Fully IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product PCI113 Data Sheet

AMC113

AMC for PCIe Bus Expansion

AMC.1 compliant
Single module, mid size (full size options available)
PCIe x4 lanes Gen2 or PCIe x8 lanes Gen2
Upstream/Downstream orientation
Dual Fiber or copper option utilizing QSFP+ connectors (mix of Fiber/Copper across the two ports is allowed)
Fully IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC113 Data Sheet

AMC103

LEGACY

AMC Module for I/O Bus Expansion

AMC.1 compliant
Single module, compact size* (mid size and full size options available)
- Patent-pending design allows standard front panel I/O connectivity in a compact AMC compliant form factor
PCIe x4 lanes
Upstream/Downstream orientation with fiber or copper option (see ordering options)
Fully IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC103 Data Sheet

PCI125

PCIe Gen3 x16 Bus Expansion via Dual x8 OCuLink

PCIe Gen3 (x16) Bus Expansion
Links to external devices via Dual PCIe x8 OCuLink connectors for x16 uplink

View product PCI125 Data Sheet

PCI126

PCIe Gen3 x16 Bus Expansion via Quad x4 OCuLink

PCIe Gen3 (x16) Bus Expansion
Links to downstream devices via Quad x4 OCuLink
Programmable option to run as Dual x8 or Quad x4 PCIe Gen3 for the downstream ports

View product PCI126 Data Sheet

PCI127

PCIe Gen4 x16 Bus Expansion via Quad x4 OCuLink (as a single combined x16)

PCIe Gen4 (x16) Bus Expansion
Links to external devices via Quad PCIe x4 OCuLink connectors for x16 uplink, dual x8 or quad x4
Programmable Retimer/Conditioner for different length of cable

View product PCI127 Data Sheet

PCI128

PCIe Gen4 x16 Bus Expansion via Dual x8 OCuLink (as a single combined x16)

PCIe Gen4 (x16) Bus Expansion
Links to external devices via Dual PCIe x8 OCuLink connectors for x16 uplink or dual x8
Programmable Retimer/Conditioner for different length of cable

View product PCI128 Data Sheet

PCI325

Multiport Serial Adapter, PCIe x4

Multi-Channel Synchronous/Asynchronous RS-422 communication
24 – RS-422 input pairs
30 – RS-422 output pairs
Supports ternary, binary, or other grouping ofinput/output pairs into multiple serial ports
Input clock to synchronise baud rate generators to an external clock reference
Clock Jitter cleaner on board
Baud rate is programmable per port
Holdover capability without external clock
Module can be programmed to handle the most complex synchronous/asynchronous serial protocols
PCIe x4 Gen2 to the host CPU

View product PCI325 Data Sheet

AMC Infiniband

AMC331

AMC Dual Port InfiniBand Module, QDR 40G

Single module, mid size InfiniBand module
AMC.1 compliant
PCIe Gen2 x8 lanes
IBTA Specification 1.2.1 compliant
RDMA, Send/Receive semantics
Hardware-based congestion control
16 million I/O channels
2GB messages
10, 20, or 40Gb/s per port
T10 as well as Fiber Channel over InfiniBand support (FColB)
CPU offload of transport operations
End-to-End QoS and congestion control
Hardware-based I/O virtulization
TCP/UDP/IP stateless offload
Dual QSFP+ InfiniBand ports
Supports active cables & fiber adapters
OS support for:
- Linux
- Windows
- Solaris

View product AMC331 Data Sheet

AMC330

AMC Dual Port InfiniBand Module

Single module, mid size InfiniBand module
AMC.1 compliant
PCIe Gen 2 x8 lanes
IBTA Specification 1.2 compliant
RDMA, Send/Receive semantics
Hardware-based congestion control
16 million I/O channels
2GB messages
10 or 20Gb/s per port
T10 as well as Fiber Channel over InfiniBand support (FColB)
CPU offload of transport operations
End-to-End QoS and congestion control
Hardware-based I/O virtualization
TCP/UDP/IP stateless offload
Dual 4x InfiniBand ports
Supports active cables & fiber adapters
OS support for:
- Linux
- Windows
- Solaris

View product AMC330 Data Sheet

USB

( close )

VT082

USB 1.1 Fiber Media Converter to Copper Hub

Supports USB 1.1 over fiber
Fits into any assembly
Seven USB copper ports
Fiber LC style connector
Link/Activity LED
Available with industrial temp range
Wide input power range 9V to 24V
Provides power to each of the USB ports
RoHS compliant

View product VT082 Data Sheet

VT081

USB 1.1 Fiber Media Converter to Copper Hub

Supports USB 1.1 over fiber
Fits into any assembly
Four USB copper ports
Fiber LC style connector
Link/Activity LED
Available in industrial temp
RoHS compliant

View product VT081 Data Sheet

VT080

USB 1.1 to Fiber Media Converter

Supports USB 1.1 over fiber
Fits into any assembly
Self powered from the USB port
Fiber LC style connector
Link/Activity LED
Available with industrial temp range
RoHS compliant

View product VT080 Data Sheet

AMC312

5 Port USB 1.1 to Fiber Media Converter

5 Channel USB 1.1 Copper to Fiber Converter
I/O connectivity for Copper is via DP style connector
I/O connectivity for Fiber is via MTP/MPO style cable
AMC.0 specification
IPMI 2.0 compliant
RoHS compliant

View product AMC312 Data Sheet

VPX Digital and Serial I/O

( close )

VRT518A

Rear I/O for VPX518, VPX RTM

3U RTM per VITA 46
Dual GbE, Clock input and I/O

View product VRT518A Data Sheet

VRT995

Rear Transition Break Out Panel for 6U VPX Modules

6U VPX RTM Module
Break out panel for a 6U VPX

View product VRT995 Data Sheet

VRT706A

Rear I/O for VPX706, VPX RTM

6U RTM per VITA 46
Quad SFP+
RS-232 and USB 3.0 to VPX706 Layerscape
I/O from P3/P5 to VHDCI Connector
Dual RS-485
Option for triple M.2 NVMe SSD

View product VRT706A Data Sheet

VRT580A

Rear I/O for VPX580, VPX RTM

6U RTM per VITA 46 for I/O Expansion
QSFP+
Quad SFP+ ports
Dual GbE
16 LVDS and 21 single ended

View product VRT580A Data Sheet

VRT705A

Rear I/O for VPX 705 VPX RTM

3U RTM per VITA 46
Dual SFP+
RS-232, USB 3.0 and GbE to VPX705 Layerscape
Mini SCSI routing I/O to VPX705 XMC

View product VRT705A Data Sheet

VRT993

VPX RTM with GPIO, RS-482, JTAG and Dual GbE

3U RTM per VITA 46• Dual GbE
Three Isolated RS-422
Isolated RS-232
Isolated 4x GPIO
Reset Button
JTAG

View product VRT993 Data Sheet

VRT761A

Rear I/O for VPX761, VPX RTM

3U RTM per VITA 46
Dual M.2 SATA Storage
PCIe x4 Gen3 via MAC/PHY to Dual 10GbE Copper

View product VRT761A Data Sheet

VRT572C

Rear I/O for VPX572, VPX RTM

3U RTM per VITA 46
Digital I/O loop back
RS-232 from payload
PCIe Expansion via x4 OCuLink
LVDS loop back
LED’s
SERDES loopback
JTAG

View product VRT572C Data Sheet

VRT703C

Rear I/O for VPX703, VPX RTM

3U RTM per VITA 46
Dual USB
RS-232 from management and payload
Dual GbE
mSATA drive
Dual 1553 I/O
PCIe Expansion via x4 OCuLink
JTAG

View product VRT703C Data Sheet

VRT765A

Rear I/O for VPX765, VPX RTM

3U RTM per VITA 46
NVME M.2 Storage
DP (Display Port)
GbE
Dual RS-232
USB 3.2

View product VRT765A Data Sheet

VRT574A

Rear I/O & NVMe Storage for VPX574, VPX RTM

3U RTM per VITA 46
GbE to rear panel
High density connectors for I/O
M.2 2280 NVMe Storage Slot

View product VRT574A Data Sheet

VRT990A

Rear Transition Break Out Panel for 6U VPX Modules

6U VPX RTM Module
Break out panel for a 6U VPX

View product VRT990A Data Sheet

VRT756A

Rear I/O for VPX756, VPX RTM

3U RTM per VITA 46
Designed specifically for the VadaTech VPX756
mSATA and a 1000Base-TX

View product VRT756A Data Sheet

VRT581A

Rear I/O for VPX581, VPX RTM

3U RTM per VITA 46
mSATA and 1000Base-TX (GbE over copper)
AUX+/- Clock
32 Singled ended and differential LVDS Input/Output

View product VRT581A Data Sheet

VPX339

Multi-Channel, Multi-Protocol Avionics, MIL-STD-1553/ARINC429/ARINC717, 3U VPX

Comprehensive multi-protocol support
Support for MIL-STD-1553A/B, MIL-STD-1760
Support for ARINC 429, ARINC 575, ARINC 717, ARINC 825
IRIG-B and IRIG-106 Chapter 10 MIL-STD-1553 MT
Full line rate on all channels simultaneously
Up to 8 programmable RS-232/422/485 channels
Up to 10 Avionics/Digital discrete I/O
48-bit/100 ns Time Stamp
Health Management through dedicated Processor

View product VPX339 Data Sheet

VRT552A

Rear I/O for VPX552, VPX RTM

6U RTM per VITA 46
Designed specifically for the VadaTech VPX552
VPX REF clock in
Loop back P1 (ports 8 thru 15)
Loop back P2 (ports 0 thru 15)
Front 0.1” header to RP3 (ports 0 thru 15) and RP4 (ports 6 and 7)
USB 3.0
Three RS-232 ports via Micro USB connectors
Dual RJ-45 to RP4 (ports 8 thru 11)
JTAG port from RP0

View product VRT552A Data Sheet

VRT769A

Rear I/O for VPX769, VPX RTM

3U RTM per VITA 46
3x 1000Base-T
HDMI Source
Dual 10G optical (SFP+ style)
2x USB 2.0/3.2
RS-232 and RS-422
Health Management RS-232
When the VPX769 is mated with the VadaTech XMC501
- Dual HDMI Sink
- GbE
- RS-232

View product VRT769A Data Sheet

VPX998B

NEW

Loopback and breakout I/O for 6U VPX Modules

6U VPX Front Module for test and validation of the backplane
Loopback and Breakout I/O for a 6U VPX

View product VPX998B Data Sheet

VRT011A

Rear Transition Module with SFP+ and Dual 1000BASE-T Ports VPX

6U RTM VITA 46
8x SFP+
2x RJ-45
Interfaces with the VadaTech VPX011 40G switch

View product VRT011A Data Sheet

VRT556A

Rear Transition Module I/O for VadaTech VPX556

6U RTM VITA 46
Very High-Density Connector (VHDCI)
- LVDS and M-LVDS
Loop back on ports RP0 and RP1 (partial)
interfaces with the VadaTech VPX556

View product VRT556A Data Sheet

VRT555A

Rear Transition Module I/O for VadaTech VPX555

6U RTM VITA 46
Very High-Density Connector (VHDCI)
- oLVDS and M-LVDS
Loop back on ports RP0/RP1/RP2 and RP3 (ports 14/15 only)
Interfaces with the VadaTech VPX555

View product VRT555A Data Sheet

VRT336A

NEW

Rear I/O For VadaTech VPX336, VPX RTM

3U RTM (Rear Transition Module) per VITA 46
VRT336A mates to the VadaTech VPX336 for the I/O breakout thru the RTM

View product VRT336A Data Sheet

VRT770A

Rear I/O for VadaTech VPX770 and/or VPX771 Module, VPX RTM

3U RTM (Rear Transition Module) per VITA 46
VRT770A mates to the VadaTech VPX770 and/or VPX771 front modules
Dual GbE 1000Base-T
M.2 storage
RS-232 ports from the Payload, BMC and IPMI

View product VRT770A Data Sheet

VRT100A

Rear I/O for VadaTech VPX100 GPGPU, VPX RTM

3U Rear Transition Module (RTM) per VITA 46
Display Port break out for VadaTech VPX100 GPGPU

View product VRT100A Data Sheet

VRT763A

NEW

Rear Transition Module I/O for VadaTech VPX763

6U RTM VITA 46
Dual M.2 NVMe Storage
Dual GbE via RJ-45
40GbE MAC/PHY to QSFP+
Interfaces with the VadaTech VPX763
Dual RS-232

View product VRT763A Data Sheet

VRT762A

NEW

Rear Transition Module I/O for VadaTech VPX762

6U RTM VITA 46
Dual M.2 NVMe Storage
Dual GbE via RJ-45
Interfaces to the VadaTech VPX762
Dual RS-232

View product VRT762A Data Sheet

VRT584A

Rear I/O for VPX584, VPX RTM

3U RTM per VITA 46
Dual QSFP28
Single GbE
GPIO

View product VRT584A Data Sheet

VRT550B

Rear Transition Module with QSFP+ and I/O Expansion for 6U VPX

6U RTM VITA 46
5x QSFP+
2x GbE via RJ-45
3x SATA Ports, 6 Gbps
Over 100 I/O to high density connector for expansion
Health Management

View product VRT550B Data Sheet

VRT571A

Rear I/O for VPX571, VPX RTM

3U RTM per VITA 46
Dual GbE
VPX clock inputs
High density connector for I/O
Management and payload RS-232 ports
JTAG connector

View product VRT571A Data Sheet

VPX981

Optical Amplifier/Splitter, 6U VPX

High channel count optical splitter, 92-way output
Dense backplane fiber output via VITA 66.1
Amplifier compensates for splitter loss
Standard 6U VPX form factor
Robust construction suitable for MIL-STD-810 and MIL-STD-167-1A
Management Port to front and rear

View product VPX981 Data Sheet

VPX586

Zynq UltraScale+ FPGA, FMC+ Carrier, 3U VPX

Xilinx UltraScale+ XCZU19EG FPGA
Single FMC+ (VITA 57.4) site
8 GB of 64-bit wide DDR4 Memory (single bank) with ECC (CPU)
Dual 4 GB of 32-bit wide DDR4 Memory (FPGA)
MPSoC with block RAM and UltraRAM
Health Management through dedicated Processor

View product VPX586 Data Sheet

VRT572A

Rear I/O for VPX572, VPX RTM

3U RTM per VITA 46
x4 PCIe
Digital I/O loop back
RS-232 from payload
LVDS loop back
LED’s
SERDES loopback
JTAG

View product VRT572A Data Sheet

VRT703A

Rear I/O for VPX703, VPX RTM

3U RTM per VITA 46
Dual x4 PCIe
Dual USB
RS-232 from management and payload
Dual GbE
mSATA drive
Dual 1553 I/O
JTAG

View product VRT703A Data Sheet

VRT703B

Rear I/O for VPX703, VPX RTM

3U RTM per VITA 46
Dual USB
RS-232 from management and payload
Dual GbE
mSATA drive
Dual 1553 I/O
JTAG

View product VRT703B Data Sheet

VRT991

Rear I/O for 3U VPX Modules

3U RTM per VITA 46
Routes front module P1/P2 differential pairs 8-15 (P1) and 0-7 (P2) to Very High-Density Connector Interface (VHDCI)

View product VRT991 Data Sheet

VRT010A

Rear Transition Module with 12 SFP+ ports for 6U VPX

6U RTM VITA 46
12x SFP+ Ports
Interfaces with the VadaTech VPX010 100G switch

View product VRT010A Data Sheet

VRT577A

Rear I/O for VPX577, VPX RTM

6U RTM per VITA 46
Designed specifically for the VadaTech VPX577
Six QSFP28
100GbE/40G/10G per QSFP28
User I/O via high density connector

View product VRT577A Data Sheet

VPX994

6U VPX I/O Module with six QSFP+ ports

6U VPX Module with six QSFP+
Clock Data Recovery (CDR) per lane
Data rates from 1.25 to 10.3125 Gb/s are programmable per port (i.e. 2.5, 3.125 Gb/s etc.)
Adaptive Equalization up to 34-dB
Adjustable Transmit from 600 to 1300 mVp-p
Adjustable Transit De-emphasis to -15dB
Front panel jacks to measure the +12V and +3.3VAUX

View product VPX994 Data Sheet