AMC583

The AMC583 provides a very capable I/O processing engine, with a large UltraScale™ FPGA coupled to two FMC+ sites and supported by an onboard quad-core P2040 processor. The FPGA has over 5,500 DSP slices and is supported by 8 GB of DDR4 (32-bits wide over two banks) enabling larger buffer sizes while processing and queuing data to the host. The XCKU115 connects to all FMC+ LA/HA/HB pairs, DP00 to DP23 (HSPCe connection not supported), balancing high-speed I/O with impressive processing power.

The AMC583 is compliant to the AMC.1, AMC.2 and/or AMC.4 specification, and optionally supports direct AMC-to-AMC connections over Ports 12-15 and 17-20.

The quad core P2040 onboard host has x4 PCIe interface to the FPGA in addition to its local bus, and is supported by DDR3, Boot Flash and an SD Card. The user can route Ports 0 and 1 to either the PPC or the FPGA.

The dual FMC+ sites accept FMCs from VadaTech’s extensive range of data acquisition, networking and RF units, and other 3rd party VITA 57.4 compliant modules.

The AMC583 has Serial Over LAN (SOL) per IPMI specification, with a hardware RNG for secure session.