FMC232

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • Onboard clocking or external clock with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector

Download Datasheet Add to Info Request

add to compare
0

The FMC232 is a FPGA Mezzanine Card (FMC) per VITA 57.1 standard, offering small footprint and low power dual fully featured wideband Rx/Tx channels.

The FMC232 combines RF front end, frequency synthesizers for Rx and for Tx, mixed-signal baseband section and flexible digital interface to host processor through the LPC connector.

The unit operates within the 70 MHz to 6.0 GHz frequency range, covering most licensed and unlicensed bands, and provides an instantaneous bandwidth programmable from 200 KHz to 56 MHz.

Utilizing an AD9361 RF transceiver, the chip offers high performance noise figure and linearity. Each Receiver (RX) subsystem includes independent Automatic Gain Control (AGC), quadrature correction, dc offset correction, and digital filtering.

Key Features
  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • Onboard clocking or external clock with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
Benefits
  • Ideal for LTE and SDR applications with wideband range versatility
  • High modulation accuracy with ultralow noise
  • Array of FMC’s and FMC carriers available from VadaTech
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC515

AMC FPGA Carrier for FMC, Virtex-7

  • AMC FPGA carrier for FPGA Mezzanine Card (FMC) per VITA-57
  • Xilinx Virtex-7 XC7V2000T in 1925 package
  • AMC Ports 4-11 are routed to FPGA (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD
  • On board PLL for buffering/multiplying and jitter cleaner
  • Option for 2GB of DDR3 memory to FPGA
  • On board Freescale QorIQ PPC2040 with 2 GB DDR-III
  • Serial Over LAN (SOL) with hardware RNG
View product AMC515 Data Sheet

FMC108

FMC Dual QSFP+ for 10 GbE/40GbE/SRIO PCIE/40Gb InfiniBand/AURORA

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Two QSPF+ cages for 10GbE/SRIO/PCIE and Aurora
  • Re-driver on both ports for a better signal quality
View product FMC108 Data Sheet

FMC223

FMC High-speed DAC 14-bit at 2.5 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single module  AD9739 DAC 14-bit at 2.5 GSPS
  • 2 Vpp differential Analog output swing
  • Programmable DSP clock
  • Dynamic performance
    • 8 QAM carriers @ 400 MHz IF –71 dBc
    • 16 QAM carriers @ 400 MHz IF –68 dBc
    • 32 QAM carriers @ 400 MHz IF –65 dBc
    • 72 QAM carriers @ 600 MHz IF –61 dBc
  • Single tone NSD @ 2.4 GSPS
    • 166 dBm/Hz @ 100 MHz IF
    • 162 dBm/Hz @ 1 GHz IF
  • Connection via MMCX for Analog Out and Reference Clock Input
  • Connection via LVDS for TRIG In/Out and GPIO
  • RoHS compliant
View product FMC223 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.