AMC560

Xilinx Zynq® UltraScale+ FPGA, Dual FMC+ Carrier, AMC

  • Xilinx UltraScale+ XCZU19EG FPGA
  • Dual FMC+ sites
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
  • Double module, mid-size

Download Datasheet Add to Info Request

add to compare

The AMC560 is an AMC FPGA Carrier with dual FMC+ (VITA 57) interfaces. The AMC is compliant to AMC.1, AMC.2, AMC.3 and AMC.4 specifications. The unit has an on-board, re-configurable FPGA which interfaces directly to the AMC FCLKA, TCLKA-D, FMC+ DP0-16 and all FMC+ LA/HA/HB pairs. The FPGA has an interface to a single DDR4 memory channel (64-bit wide with ECC). This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The AMC is based on Xilinx UltraScale+ XCZU19EG MPSoC FPGA with dual FMC+ sites.

The FPGA has 1968 DSP Slices and 1143k logic cells. The XCZU19EG includes a quad-core ARM processor.

The Module has on board 64 GB of Flash, 128 MB of boot flash and an SD Card as an option.

Key Features
  • Xilinx UltraScale+ XCZU19EG FPGA
  • Dual FMC+ sites
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
  • Double module, mid-size
Benefits
  • Dual FMC+ sites on a double module AMC
  • Zynq UltraScale+ MPSoC
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

White Papers
Related News
VIDEO

January 14, 2020

Demonstration of the FMC239 dual ADRV9009 phase synchronization. 0:00 - 2:45 Hardware Introduction |  2:45 - 4:55 Application | 4:55 - 5:50 Demo...   view video...

Related Products

AMC592

Kintex UltraScale FPGA Carrier for FMC, AMC

  • Single module, mid-size AMC (full-size optional)
  • AMC FPGA carrier for FMC per VITA 57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product AMC592 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VT813

8U uTCA.4 Chassis Platform, (3+1) 4400W

  • μTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
  • Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane (40GbE ready)
  • Redundant FRU information devices and carrier locators
  • Four 1.1 kW AC Power supply for 4.4 kW total
  • Telco aarm
  • FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front and back
View product VT813 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.