Altera Stratix® IV EP4S100Gx, FPGAFPGA
- Single module, mid-size per AMC.0
- Altera Stratix® IV EP4S100Gx in 1517 package
- AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
- Onboard Freescale QorIQ PPC2040 (Quad Core Processor)
- Ports 2 and 3 as SATA to P2040
- Ports 0 and 1 are Muxed with P2040 GbE
- FCLKA and TCLKA/D routed directly to FPGA
- 2 GB of DDR3 to the FPGA with optional three banks of QDR-II+ (each 18-bit wide)
- Conduction cooled version available
Download Datasheet Add to Info Request
add to compare
The AMC531 is based on the Altera Stratix® IV EP4S100Gx FPGA in 1517 package and is compliant to AMC.1, AMC.2, AMC.3 and/or AMC.4 specifications. It has two x4 Ports of XAUI/PCIe routing to the backplane and dual front-panel SFP+, making it ideal for wireless, wireline and broadcast markets.
Local DDR3 and optional QDR-II+ memory provide local buffering, while the onboard P2040 processor provides flexibility in board bring-up. The backplane clocks are routed to the FPGA for communication applications, and the P2040 supports offboard storage via Port 2/3 SATA connections.
The module is available as AMC531 for air-cooled (MTCA.0 and MTCA.1) and as AMC531C for rugged conduction-cooled (MTCA.2 or MTCA.3) applications.
See Intel FPGA Solutions for the advantages of using VadaTech products during application development.
VIDEO: Intel FPGA solutions at VadaTech: This video introduces the advantages of using VadaTech to build your new products embedding Intel FPGA SoC.
Key Features
- Single module, mid-size per AMC.0
- Altera Stratix® IV EP4S100Gx in 1517 package
- AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (PCIe, SRIO, XAUI, etc. are FPGA programmable)
- Onboard Freescale QorIQ PPC2040 (Quad Core Processor)
- Ports 2 and 3 as SATA to P2040
- Ports 0 and 1 are Muxed with P2040 GbE
- FCLKA and TCLKA/D routed directly to FPGA
- 2 GB of DDR3 to the FPGA with optional three banks of QDR-II+ (each 18-bit wide)
- Conduction cooled version available
Benefits
- Dual front-panel SFP+ and dual x4 XAUI/PCIe provides balanced architecture
- Onboard P2040 host simplifies system bring-up
- Electrical, mechanical, software, and system-level expertise in house
- Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Block diagram
Related Products
FMC223
FMC High-speed DAC 14-bit at 2.5 GSPS Module
- FPGA Mezzanine Card (FMC) per VITA 57
- Single module AD9739 DAC 14-bit at 2.5 GSPS
- 2 Vpp differential Analog output swing
- Programmable DSP clock
- Dynamic performance
- 8 QAM carriers @ 400 MHz IF –71 dBc
- 16 QAM carriers @ 400 MHz IF –68 dBc
- 32 QAM carriers @ 400 MHz IF –65 dBc
- 72 QAM carriers @ 600 MHz IF –61 dBc
- Single tone NSD @ 2.4 GSPS
- 166 dBm/Hz @ 100 MHz IF
- 162 dBm/Hz @ 1 GHz IF
- Connection via MMCX for Analog Out and Reference Clock Input
- Connection via LVDS for TRIG In/Out and GPIO
- RoHS compliant
View product
FMC223 Data Sheet
UTC020
DC Power Module, 936W
- Single module, full-size per AMC.0
- Dual -36V DC to -75V DC input, 936W (available in 468W)
- Hot swappable with support for power module redundancy
- Dual IPMI bus
- 32-bit RISC processor
- Two banks of 256K flash for redundancy
View product
UTC020 Data Sheet
VT899
7U uTCA Cube Chassis, 6 AMC
- 7U μTCA Cube
- 5” x 7U x 9” deep (with handles 10” deep)
- Redundant Cooling Units
- Up to six AMCs: 6 full size single module or 3 full size double module
- Radial I2C bus to each AMC
- Single Star passive 26 layer backplane
- Redundant FRU information devices and carrier locator
- Telco Alarm
- CLK1, CLK2 and CLK3
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT899 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
