Log in

You are accessing a protected product information and must login.

If you are a VadaTech customer and have not yet registered, please contact sales@vadatech.com to provide you VadaTech customer account information.

I accept VadaTech copyright information.

Register

(Reload image)

Submit

Change Password

Submit

Forgot Password

Please enter your email registered at VadaTech and we will send you your password.

Submit

Back to login

You are here: HomeProductsStorage

Storage

VadaTech has a wide range of storage modules for MicroTCA systems and other systems than can accommodate the AdvancedMC (AMC) form factor with options up to SAS-3 and SATA III, RAID controllers and JBOD AMCs with up to 8 mSATA SSDs on a single module.

ATCA Storage

ATC600

ATCA Storage Blade with RAID and iSCSI

Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network File System (NFS) or Common Internet File System (CIFS)
Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
Fully compliant with the IETF RFC3270 and RFC4171
RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
RAID spans 10, 50 and 60
Battery pack option to prevent data loss
Utilizes VadaTech’s proven IPMI Management Controller

View product ATC600 Data Sheet

ATC605

ATCA Storage Blade with RAID and iSCSI

Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network FileSystem (NFS) or Common Internet File System (CIFS)
Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
Fully compliant with the IETF RFC3270 and RFC4171
RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
RAID spans 10, 50 and 60
Battery pack option to prevent data loss
Utilizes VadaTech’s proven IPMI Management Controller

View product ATC605 Data Sheet

ATCA RTM Storage

( close )

ART116

ATCA Rear I/O Transition Module

ATCA rear I/O Module for Blades
- i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
DVI-I interface (VGA and DVI-D)
Resolution @ 1920x1200
Dual on board 2.5” SAS/SATA Disk
Disks run as independent or as RAID 0 or 1
Two port USB 2.0 high speed (480Mbit/s)
Front Blade Dual GbE to RJ-45
Front Management RS-232 to RJ-45
IPMI 2.0 Man

View product ART116 Data Sheet

ART115

ATCA Rear I/O Transition Module

ATCA rear I/O Module for Blades
- i.e. Sun Microsystems Netra Blade CP3260,CP3220, VadaTech ATC114, etc.
Dual DVI/VGA interface
Resolution @ 1920x1200
Dual 10GbE SFP+
Removable on board 2.5” SAS/SATA Disk
Two port USB 2.0 high speed (480Mbit/s)
Front Blade Dual GbE to RJ-45 or LC Fiber(option for SX or LX)
Front Blade Management RS-232 to RJ-45
Dual RS-232 for the host blade
IPMI 2.0 Management Controller
RoHS compliant

View product ART115 Data Sheet

ART114

ATCA Rear I/O Transition Module

ATCA rear I/O Module for Blades
- i.e. Sun Microsystems Netra Blade CP3260,CP3220, ATC114, etc.
Two on board 2.5” SAS/SATA Disks
Disks run as independent or RAID 0 or 1
QSFP connector for PCIe Expansion
- The PCIe is Gen2
Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
Front Blade RS-232 to Micro DB-9
IPMI 2.0 Management Controller

View product ART114 Data Sheet

ART113

ATCA Rear I/O Transition Module

ATCA rear I/O Module for Blades
- i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
VGA resolution @ 1920x1200 with 128MB
On board 2.5” SAS/SATA Disk
Three port USB 2.0 high speed (480Mbit/s)
Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
Front Blade RS-232 to DB-9
Dual RS-232 for the host blade
IPMI 2.0 Management Controller

View product ART113 Data Sheet

ART112

ATCA Rear I/O Transition Module

ATCA rear I/O Module for Blades
- i.e. Sun Microsystems Netra Blade CP3260, CP3220, VadaTech ATC114, etc.
VGA resolution @ 1920x1200 with 128MB
SAS Expander via I-PASS connector
- for JBOD
On board 2.5” SAS/SATA Disk
Three port USB 2.0 high speed (480Mbit/s)
Front Blade Dual GbE to RJ-45 or LC Fiber (option for SX or LX)
Front Blade RS-232 to DB-9
IPMI 2.0 Management Controller

View product ART112 Data Sheet

ART129A

Rear Transition module for ATC129

AdvancedTCA RTM for VadaTech ATC129 Blade
Dual removable 2.5” SATA Disk
Dual USB2.0
PMI 2.0 compliant

View product ART129A Data Sheet

AMC - RAID

( close )

Storage modules without a disk, including RAID and Advanced RAID.

AMC630

1.8” Quad SATA Drive, 6 Gbps RAID HBA

1.8” SATA 6.0 Gbps drive HBA (Host BusAdapter)
AMC.1 x2 PCIe Gen 2
Four SATA disks on a single AMC
Independent disk or hardware RAID 0, 1,and 10
Double-module, compact-size (mid and full size options available)
IPMI 2.0 compliant
RoHS compliant

View product AMC630 Data Sheet

AMC633

AMC RAID HBA, with 8 mSATA Disks

Single module, mid-size per AMC.0
AMC RAID Host Bus Adapter HBA
Module comes with 8 mSATA Disks
Single removable tray carries mSATA drives
AMC.1 with PCIe Gen3 x8 or x4
Integrated RAID 0, 1, 1E and 10
Auto-latching of the caddy into the carrier for secure retention, push-button release

View product AMC633 Data Sheet

AMC631C

Integrated RAID HBA with SAS Expander, AMC

Host Bus Adapter (HBA) for off board SATA and SAS-3 (12 Gbps) drives
Single module, mid-size per AMC.0
Integrated RAID 0, 1, 1E, and 10
PCIe Gen3 x8 or x4 on ports 4-11, AMC.1 compliant
SAS-3/SATA III x4 lanes on ports 12-15 and ports 17-20
Additional x24 lanes on tongue 2

View product AMC631C Data Sheet

AMC640

NVMe HBA, with Quad M.2 NVMe Solid State Drives, AMC

AMC M.2 NVMe Host Bus Adapter with quad M.2 NVMe type SSD
Allows for M.2 Type 2280 and/or 22110
AMC.1 PCIe Gen3 x8 or dual x4 to the backplane
PCIe x4 Gen3 to each M.2 Socket
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC640 Data Sheet

AMC641

NVMe HBA, with Dual M.2 NVMe Solid State Drives, AMC

AMC M.2 NVMe Host Bus Adapter with dual M.2 NVMe type SSD
Allows for M.2 Type 2280 and/or 22110
AMC.1 PCIe Gen3 dual x4 to the backplane
PCIe x4 Gen3 to each M.2 Socket
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC641 Data Sheet

AMC645

NVMe HBA with 16 NVMe Solid State Drives, AMC

AMC NVMe Host Bus Adapter (HBA) with Full support for RAID
Dual Core ARM A15 RAID on Chip (ROC)
Onboard 8 GB of DDR4 Memory with ECC
Hardware Engine for RAID 5 and RAID 6 acceleration
AMC.1 PCIe Gen3 x8
Single module, mid-size per AMC.0
IPMI 2.0 compliant

View product AMC645 Data Sheet

AMC629

AMC Integrated RAID w/HBA

Host Bus Adapter (HBA) for external SATA III (6.0 Gbps) or SAS-3 (12 Gbps) drives
Conduction cooled version available
Single module, mid-size per AMC.0
Integrated RAID 0, 1, 1E, and 10
PCIe Gen3 x8 or x4 on ports 4-11, AMC.1 compliant
SAS-3/SATA III x4 lanes on ports 12-15 and ports 17-20
IPMI 2.0 compliant

View product AMC629 Data Sheet

AMC628

Advanced RAID (0, 1, 5, 6, 10, 50 and 60)

RAID levels 0, 1, 5 and 6
RAID spans 10, 50 and 60
Dual Core ROC (RAID On Chip) at 800MHz per Core
PCIe Gen3 x4 or x8 lanes
Single module, mid size (full size option available)
Two mini-SAS-SFF-8644 x4 connectors (ASHD Interconnect System)
6Gb/s throughput per port
1GB DDRIII cache (1333 MHz)
Battery backed cache protection (option)
Connect up to 240 SATA and/or SAS devices
Up to 64 logical drive support
Capacity Expansion
RAID level migration
IPMI 2.0 compliant
RoHS compliant

View product AMC628 Data Sheet

AMC626

Integrated RAID, Expansion w/HBA

Host Bus Adapter (HBA) for external SATA III (6.0 Gbps) or SAS-3 (12 Gbps) drives
AMC.1 compliant, PCIe Gen3 x8 or x4
Support for 8 SAS/SATA ports
Dual expansion ports to external devices
Integrated RAID 0, 1, 1E, and 10
Single module, mid-size (full-size options available)

View product AMC626 Data Sheet

AMC – HBA

AMC243

Dual High performance 40/50/100GbE Host Bus Adapter

Dual 40/50/100GbE via QSFP28+
PCIe Gen3 x16
32K concurrent offload connectivity capacity
Full TCP and UDP offload
Full iSCIS and FCOE offload
Full NVMe over Fabrics (NVMe-oF) offload
On board 4GB of DDR-4 with ECC

View product AMC243 Data Sheet

AMC619

SATA HBA with USB 2.0 to SDHC Socket, AMC

AMC.2 SATA Host Bus Adapter
USB 2.0 to SDHC Socket
Allows for any 2.5” SATA Disk
Port 2 to SATA interface
Port 20 (RX) for the USB 2.0 to SDHC socket
Single module, mid-size per AMC.0 for SSD and full-size for Enterprise Hard drive or large SSD Size
IPMI 2.0 compliant

View product AMC619 Data Sheet

AMC - Dual/Quad/JBOD

( close )

Storage modules with dual or quad disks. Versions with one or more removable disks are available.

AMC635

AMC Carrier for JBOD, 8 mSATA Disks

JBOD Carrier Module for 8 Mini-SATA (mSATA) disks
Single removable tray carries mSATA drives
Conduction cooled version available
Single module, mid-size per AMC.0
Auto-latching of the caddy into the carrier for secure retention, pushbutton release
IPMI 2.0 compliant

View product AMC635 Data Sheet

AMC632C

AMC Carrier for JBOD, 8 mSATA Disks

JBOD Carrier Module for 8 Mini-SATA (mSATA) disks
Single module, mid-size per AMC.0
Single removable tray carries mSATA drives
Multi-Terabit storage capacity in a single module AMC form factor carrier
Auto-latching of the caddy into the carrier for secure retention, push button release

View product AMC632C Data Sheet

AMC624

2.5” Dual/Single SATA III Drive, 6 Gbps

2.5” SATA III 6.0 Gbps drive (can support legacy 1.5 and 3 Gbps)
Single module, mid-size for single disk or full-size for dual disk
AMC.3 compliant
Option for Solid State Drive or Rotary Disk

View product AMC624 Data Sheet

AMC623

1.8” Quad SATA Drive, 6 Gbps RAID HBA

1.8” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
AMC.1 x2 PCIe Gen 2
Supports four SATA disks on a single AMC module
Independent disk or hardware RAID 0, 1 and 10\
Single module, mid-size with full-size option
IPMI 2.0 compliant
RoHS compliant

View product AMC623 Data Sheet

AMC622

1.8” Dual SATA Drive, 6 Gbps RAID HBA

1.8” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
AMC.1 x2 PCIe Gen 2
Two SATA disks on a single AMC
Independent disk or hardware RAID 0, 1, and 10
Single-module, compact-size (mid and full-size options available)
IPMI 2.0 compliant
RoHS compliant

View product AMC622 Data Sheet

AMC621

2.5” Dual SATA Drive, 6 Gbps RAID HBA

2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
AMC.1 x2 PCIe Gen 2
Supports two SATA disks on a single AMC module
Independent disk or hardware RAID 0, 1 and 10
Single module, full-size
IPMI 2.0 compliant

View product AMC621 Data Sheet

AMC609

LEGACY

AMC 1.8 Inch Removable Dual Drive Module

Two 1.8 inch HDDs, up to 320 Gbytes total
Available with optional Solid State Flash drives
AMC.1 or AMC.3 options
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC609 Data Sheet

AMC603

LEGACY

AMC 2.5 Inch Dual Drives Module

Two 2.5 inch SATA HDDs providing up to
400 Gbytes combined
Optional Solid State Disk (SSD)
AMC.1 or AMC.3 options
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC603 Data Sheet

AMC602

LEGACY

AMC CompactFlash w/ 2.5 Inch SATA Drive Module

Single module, compact size (mid size and full size options available)
2.5 inch SATA HDD
Front Panel accessible CompactFlash up to
8Gbytes (see ordering options)
Available with an optional 2.5” Solid State Flash drive (SSD)
AMC.1 or AMC.3 options
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC602 Data Sheet

AMC601

LEGACY

1.8 Inch Dual Drive Module

Two 1.8 inch SATA HDDs, up to
240 Gbytes total
Available with optional Solid State Flash drives
AMC.1 or AMC.3 options
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC601 Data Sheet

AMC - Single Disk

( close )

Storage modules with a single disk. Versions with a removable disk are also available.

AMC639

2.5” SAS/SATA Drive, DVI-I

2.5” SAS/SATA HDD
AMC.1 and AMC.3 compliant
x1 PCIe Gen 1
Single module, mid-size (full-size options available)
DVI-I for graphics interface
16 MB DDR Memory
Support for 1920x1440 resolution
IPMI 2.0 compliant

View product AMC639 Data Sheet

AMC611

U.2 NVMe or SATA 2.5” Solid State Drive, AMC

AMC Solid State Drive (SSD) with U.2 form factor
PCIe x4 or SATA interface
Storage over 15TB in single 2.5” 15mm height
AMC.1 PCIe
AMC.3 SATA
Single module, compact, mid-size or full-size per AMC.0
IPMI 2.0 compliant

View product AMC611 Data Sheet

AMC612

NEW

Network Attached Storage (NAS) AMC with NVMe Storage

Network Attached Storage (NAS) AMC Module
Storage NVMe with U.2 or SATA SSD
Dual 10GbE (ports 4 and 8 as 10GBASE-KR or 4-7 or 8-11 as XAUI)
Dual GbE (ports 0 and 1)
GbE to the front
AMC.2 specification
On board 8GB of DDR-4 memory with ECC
Single module mid-size or full-size per AMC.0
IPMI 2.0 compliant

View product AMC612 Data Sheet

AMC613

Network Attached Storage (NAS) AMC with Quad M.2 NVMe Storage

Network Attached Storage (NAS) AMC Module
Quad Core ARM at 1.8GHz per core with 8GB of DDR-4 Memory
Quad NVMe M.2 Storage devices
- Configurable as RAID 0 or RAID 1
Dual 10GbE (ports 4 and 8 or 4-7 or 8-11 as XAUI)
Dual GbE (ports 0 and 1)
GbE to the front
AMC.2 specification
Single module mid-size or full-size per AMC.0
IPMI 2.0 compliant

View product AMC613 Data Sheet

AMC638

2.5” SATA Drive, 6 Gbps RAID HBA, DVI-I

2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
AMC.1 x1 PCIe Gen 2
Supports SATA ports at 6.0 Gbps
DVI-I for graphics interface
Independent disk or RAID 0, 1 and 10
Single module, compact-size (mid-size, full-size options available)
IPMI 2.0 compliant

View product AMC638 Data Sheet

AMC627

2.5” SATA III/SAS-3 Drive, 12 Gbps RAID HBA

Host Bus Adapter (HBA) for 2.5 inch disk with SATA III(6.0 Gbps) or SAS-3 (12 Gbps)
AMC.1 compliant
PCIe Gen3 x4 lanes
Independent disk or hardware RAID 0, 1, 1E and 10
AMC mid-size (full-size options available).
IPMI 2.0 compliant
RoHS compliant

View product AMC627 Data Sheet

AMC625

2.5” SAS–3 Drive, 12 Gbps

2.5” SAS–3 Drive 12 Gbps (can support legacy 3 Gbps and 6 Gbps)
AMC.3 compliance
Single module, mid-size (full-size options available)
Option for Solid State Drive or Rotary Disk
IPMI 2.0 compliant
RoHS compliant

View product AMC625 Data Sheet

AMC624

2.5” Dual/Single SATA III Drive, 6 Gbps

2.5” SATA III 6.0 Gbps drive (can support legacy 1.5 and 3 Gbps)
Single module, mid-size for single disk or full-size for dual disk
AMC.3 compliant
Option for Solid State Drive or Rotary Disk

View product AMC624 Data Sheet

AMC620

2.5” SATA HBA with 6Gbps Disk Drive

2.5” SATA 6.0 Gbps drive HBA (Host Bus Adapter)
AMC.1 x2 PCIe Gen 2
Supports SATA ports at 6.0 Gbps
Single Mini-SAS SFF-8644 (SAS HD Interconnect System)
Independent disk or RAID 0, 1 and 10
Single module, compact-size (mid-size, full-size options available)
IPMI 2.0 compliant

View product AMC620 Data Sheet

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

AMC.1 and AMC.3
Single-width, mid size (option for full size)
4 Gigabit Ethernet ports via RJ-45
On board 2.5” disk with direct connect toPorts 2 and 3
PCIe Gen2 x4 lanes to Ports 4-7
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC610 Data Sheet

AMC608

2.5” SAS/SATA, Graphics and USB

Single module, mid size (full size option available)
PCIe x4 Lane Gen2 (5.0 Gb/s per lane)
2.5” SAS/SATA HDD
VGA Interface with 128MB of Memory
Resolution @ 1920x1200
Two USB 2.0 ports @ 480Mbits/s
AMC.1 and AMC.3 compliant
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks

View product AMC608 Data Sheet

AMC607

2.5” SAS/SATA, Graphics and Audio

Single module, mid size (full size option available)
PCIe x4 Lane
2.5” SAS/SATA HDD
DVI-I Interface with 128MB of GDDR3
Support of the latest high-resolution and wide-screen displays such as QXGA(2048x1536) @ 75Hz, 2560x1600 @ 60Hz
HDMI Connection for 480p, 720p, and1080i
Multi-channel 5.1 surround audio
Optimized for DirectX 10
AMC.1 and AMC.3 compliant
Active-Active 2:1 multiplexer switch
IPMI 2.0 compliant
RoHS compliant
OS support for:
- Linux
- Windows
- Solaris
- VxWorks