AMC595

The AMC595 is based on the Virtex UltraScale™ XCVU440 FPGA in FLGA2892 package with an onboard Power PC PC2040. The unit is compliant to the AMC.1, AMC.2, AMC.3 and/or AMC.4 specification.

The module allows an FMC module to be mated. However, the FMC module must NOT use the standard height connector and must have the mated height of 17.5mm (SamTec part number SEAM-40-11.0-L (or S)-10-2-A on the FMC module, the standard FMC connector is SEAM-40-03.5-L (or S)-10-2-A). VadaTech will deliver any of its FMC modules that mate to the AMC595 with the modified connector height. Contact Sales for the ordering option.

The onboard, re-configurable FPGA interfaces directly to the AMC FCLKA and TCLKA-D via a Cross Bar MLVDS (CBS). It also has interface to one bank of DDR4, 64-bit wide, with 8 GB total memory. This allows for large buffer sizes to be stored during processing as well as for queuing the data to the host.

The onboard quad core P2040 runs at 1.2 GHz with 1 GB of DDR3, 128 MB of Boot Flash, and a 32 GB SD Card. This PPC has x4 PCIe to the FPGA in addition to its local bus. Dual GbE is routed to Ports 0 and 1 of the AMC via a mux to allow FPGA routing to the ports. This also applies to Ports 2-3 (PPC SATA ports or directly to the FPGA via mux selection).